How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct procedure to add a second key. It requires dealer assistance using the handheld computer known as Tech-2. Then a new key as well as transponder need to be bought and then programmed into the car.
Make sure to rotate your keys in order to prevent one from wearing out quicker than the other. This will help to keep your keys in good condition.
Replacement Case
The new key fobs do not look like the old Saab keys. They feature electronic components which make it hard to copy. This has made car theft considerably more difficult than it was years ago. It also makes it more expensive to replace lost keys.
Every owner of a Saab 9-3 must have at a minimum two functioning keys. It costs a fortune to replace a lost or damaged key since it requires replacing the CIM module, and programming the locking cylinders. Dealers typically charge between $100 and $200 for this.
There are options to avoid these high costs. Some parts dealers will use the code of the spare key to cut a new metal blade for a fraction of that of a dealer. The key, however, must be the same as the original to work correctly within your car.
Follow these steps to replace the case. You will need a flathead screwdriver along with some patience. Utilizing the screwdriver, slowly tear the plastic away and remove the emergency key from the case. Once you have the case opened, take out the electronics and put them in the new case. Make sure you insert the correct badge and key back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost component that can be replaced easily and quickly. This video tutorial on DIY from YouTube user Cyclone Cyd explains how to replace the remote key fob battery in just four steps. This tutorial will work with any modern Saab key fob. However, the procedure might differ slightly.
The button is typically located just below the Saab logo on the back of the fob. This button is usually located close to the Saab logo on the back of the fob. Next you will need the flathead screwdriver to insert into the tiny hole in this button. This will allow you to open the fob's case so that you can replace the battery.
After you have installed the new batteries CR1632, you can rebuild your remote key fob. You can then program it into your car. The entire process should not take more than one hour. This is a very easy procedure that doesn't require special tools.
The procedure is a little more complicated in the event that you lose the key, but it's possible. The dealer must verify the VIN of the car, and then request a replacement key blade and a TWICE module with the exact unique code. Then, they'll have to cut the replacement key and then program it with a brand new tool for programming called MDI.
Replacement Key Fob
The key fob contains an internal battery that is used to lock and unlock your vehicle. The batteries last for a period of, and they will eventually go out of service. This is a typical issue that happens to all cars and the good news is that you can replace the batteries in most fobs, without replacing the entire case. You can buy replacement fobs on Amazon that come with all the electronic components already installed, so you'll be able to simply open the case and replace those batteries that are old. It is important to keep in mind that you'll have to remove the emergency key first. you can do this by putting the screwdriver of a small flathead into the slot in the middle of the case. saab key programming should be moved around the case, and it should split open, making it easy to take it out.
When you're ready to replace the keys make sure you have a spare as this will reduce the total cost by a substantial amount. If you have an additional key, you can ask the dealer to cut the key and program it for your car. This is a lot less expensive than buying a new key fob.
It is possible to add a second key to your vehicle in the event that you don't have one, but it will require a great deal of research and effort. A second key can cost around a hundred dollars and it also requires the programming of the car's computer. This can be done by a professional, however it is an expensive option for the majority of owners.
Replacement Ignition
As opposed to the earlier Saab automobiles, the current SAAB 9-3 models are equipped with an advanced alarm system that is built on a key code. If you lose your only key, it can be costly to replace it with another one because the car must be equipped with a specific computer and also be programmed to accept a new key. Dealers can charge hundreds of dollars to program the new key even if they're unable to complete the task.
Dealers will charge you top dollar to replace your car computer (also called the CIM or SAAB twice) If you lose your sole working key. We can reprogramme the existing EEPROM inside your car's computer to be ready to accept an additional key. This will save you more than 50% of the cost you would pay an auto dealer.
If you've been a long-time owner of a 03-11 SAAB 9-3, then you probably are aware that the ignition key isn't really all that durable. If your ignition key isn't working properly, you should consider replacing it. They can become extremely sticky and the buttons have been known to fall off. It's good to know that replacing the ignition key isn't as difficult as it sounds and is fairly easy to do with the proper tools.